SSL

Ordering MakerBot hardware: https://encrypted.kd85.com/makerbot.html

KD85.com bvba is the official Makerbot distributor for Belgium/Luxembourg. If you are looking for a distributor in another region, please check http://www.makerbot.com/distributors/

General info on http://makerbot.kd85.com

We have plenty of stock at least 5 units of the Replicator 2 and Replicator 2x We also have the new digitizer and the new flexiable filaments and dissolvable filaments for ABS and PLA

20090928: Yes we have stock and yes we ship European wide!
20100617: We have full stock of Makerbot cupcakes, MK5 drive gear, electronics and stepper motors. Also have the Frostruder MK2 kit
20100630: Again a new shipment of cupcakes, opto endstops, Fluorescnet Red ABS plastic, Diecut Kapton surface, and the Deluxe Filament Spindle MK1 kit! September: New on stock, the MK5 toolhead and relay board
20100927: New stock of cupcakes, MK5 toolhead, Automated Build Platform, Cyclops
20110101: New stock of Thing-O-Matic, EUR 1199
20110325: Just took delivery of 10 new Thing-O-Matic kits with the MK6, EUR 1199, ready to ship asap (missing power supplies though). Also various news: MK6 upgrade kits, new nozzels, 1.75mm plastic Nuclear Green, water soluble PVA, ...
20110331: Finally here: RAMPS pre-assembled kits, Mendel hardware kits and Mendel belt kits from Ultimachine.
20120427: Just received the new replicator in dual extruder version, ready to ship on Monday, EUR 1999
20121127: We have plenty of Makerbot Replicator 2 (single extrusion) units on stock, ready to ship
20130320: We have the new Replicator 2x on stock from now on

We organize workshops and meetings specific for the MakerBot like we did last summer at HAR2009.

All items come direct from MakerBot in the US, so you are getting an official kit and support the future development of the MakerBot.

All the quick and dirty pictures: http://makerbot.kd85.com/images

If you need info about the kit and how to get hard/software installed, check http://wiki.makerbot.com/

By Submitting this order, you agree to our invoice payment conditions.

Know your rights as a European consumer!

If you have questions about your order shipping, availability, or any other doubt, call me at +32 478 21 73 55 or mail me at wim@kd85.com and you'll get a prompt answer.
(Dit kan best in het Nederlands, ici on parle Français, ich spreche auch Deutsch, and yes of course I speak English)

Prices are in EUR and exclude VAT (21%). European companies (not Belgian) with a valid VAT Registration number don't pay VAT, nor does anybody from 'Export countries' like Greenland, Iceland, Liechtenstein, Monaco, Norway, Switzerland, Gibraltar, Russia and United States

We ship using UPS exclusively. Average cost is EUR 25 (EU 15 for Belgium) for 1 Makerbot for Standard service (3 days delivery). Express (next day delivery) is also possible but is a bit more expensive (EUR 40). If you want to order multiple units, UPS has a flexible weight based price increase, so estimate about EUR 30 to EUR 40 max, but ask me first. It depends on the country of destination and the weight. You can always check it on http://www.ups.be. Alternatively if you want I can ship out small packages < 1kg with regular mail A Prior, it's cheaper but has no tracking.

About KD85.com bvba: We have been distributing OpenBSD & OpenSSH software and softwear, Soekris hardware, Liantec hardware and Nexcom hardware in Europe since 2000. You might have even bumped into us at plenty of events. If you have doubts about our operation, ask around, there are plenty of satisfied customers as we strive to deliver quality products on time, at a fair price while adhering safe credit card transactions, accounting and privacy.

Academic institutions (schools, universities, training centers, ...) get a 10% discount, email me with your details.

P/N Description Price/piece without VAT In stock? Order direct Image
digitizer MakerBot Digitizer Desktop 3D Scanner
Includes everything you need, including power supply and Europe power cable
Preassembled kit
EUR 799 Yes!
sense3d Sense 3D scanner, handheld EUR 355 Yes!
replicator_5th MakerBot Replicator 5th Generation 3D Desktop printer, single toolhead
Includes everything you need, including power supply and Europe power cable
Includes 1 spool of 1.75 mm PLA fillament
This printer only uses PLA plastic
Preassembled kit
EUR 2899 YES
replicator_2 MakerBot Replicator 2, single toolhead
Includes everything you need, including power supply and Europe power cable
Includes 1 spool of 1.75 mm PLA fillament
This printer only uses PLA plastic
Preassembled kit
EUR 2199 YES
replicator_2x MakerBot Replicator 2x, dual toolhead
Includes everything you need, including power supply and Europe power cable
Includes 1 spool of 1.75 mm ABS fillament
This printer uses only ABS plastic
Preassembled kit
New batch: end of August production, upgraded model (2nd revision)
EUR 2699 Yes
replicator_dual MakerBot Replicator 1 with Dual toolhead
Includes 1 roll of 1.75 mm fillament
Preassembled kit
EUR 1999 no
makerbot_tom MakerBot Thing o Matic, single toolhead MK7
Includes everything you need, including power supply and Europe power cable
Includes 1 spool of 1.75 mm fillament
This is a kit you need to assemble yourself
EUR 1199 Yes
roll_abs_1kg roll of ABS plastic 1 kg 1.75 mm diameter
For use with the Replicator 2x only, not the R2!
specify the colours you are looking for in additional comments
comes on a black spool that fits the makerbot rear
Acid Lake ABS 1kg Spool
Dark Brown ABS 1kg Spool
Dark Sanguine Red ABS 1kg
Deep Dark Teal ABS 1kg Spool
Fluorescent Yellow ABS 1kg Spool
Fruit Punch Magenta ABS 1kg Spool
Glow In The Dark ABS Plastic 1kg Spool
Grape Candy (Purple) ABS 1kg Spool
Green Sea ABS 1kg Spool
Helsinki Sky ABS 1kg Spool
Natural ABS 1kg Spool
Navy Wool ABS 1kg Spool
Silver ABS 1kg Spool
Slate Gray ABS 1kg Spool
Stellar Pink ABS 1kg Spool
Stone Gray ABS 1kg Spool
True Black ABS 1kg Spool
True Green ABS 1kg Spool
True Orange ABS 1kg Spool
True Red ABS 1kg Spool
True White ABS Plastic 1kg Spool
True Yellow ABS 1kg Spool
White ABS Plastic 1kg Spool
Natural (creamier white) ABS Plastic 1kg Spool
EUR 50 Yes
roll_glowabs_1kg roll of Glow in the dark ABS plastic 1 kg 1.75 mm diameter
the colour is broken white
EUR 90 Yes
roll_pla_1kg roll of PLA plastic 1 kg 1.75 mm diameter NOT translucent
specify the colours you are looking for in additional comments
comes on a black spool that fits the makerbot rear
only works on the Replicator 2, not the Repliator 2x

PLA 1.75mm Black 1Kg on Spool
PLA 1.75mm Blue 1Kg on Spool
PLA 1.75mm Brown 1Kg on Spool
PLA 1.75mm Gold 1Kg on Spool
PLA 1.75mm Orange 1Kg on Spool
PLA 1.75mm Purple 1Kg on Spool
PLA 1.75mm Red 1Kg on Spool
PLA 1.75mm Cool grey 1Kg on Spool
PLA 1.75mm White 1Kg on Spool
PLA 1.75mm Yellow 1Kg on Spool

EUR 50 Yes
roll_pla_t_1kg roll of PLA plastic 1 kg 1.75 mm diameter translucent (transparant)
specify the colours you are looking for in additional comments
comes on a black spool that fits the makerbot rear
only works on the Replicator 2, not the Repliator 2x

PLA 1.75mm Black 1Kg on Spool
PLA 1.75mm Red Translucent 1Kg on Spool
PLA 1.75mm Green Opaque 1Kg on Spool
PLA 1.75mm Blue Translucent 1Kg on Spool
PLA 1.75mm Green Translucent 1Kg on Spool

EUR 65 Yes
roll_pva_1kg roll of PVA plastic 1 kg 1.75 mm diameter
comes on a black spool that fits the makerbot rear
EUR 75 Yes
roll_support_1kg roll of Makerbot ABS Support material 1 kg 1.75 mm diameter
only works on ABS plastic, not PLA!
comes on a black spool that fits the makerbot rear only works on the Replicator 2x, not the Repliator 2
EUR 65 Yes
roll_pcl_1kg roll of Makerbot Flexible Filament material 1 kg 1.75 mm diameter
only works on the Replicator 2
comes on a black spool that fits the makerbot rear
only works on the Replicator 2, not the Repliator 2x
EUR 135 Yes
makerbot_plast4 MakerBot Plastruder MK4 Kit
Does not include electronics!
EUR 120 Yes
makerbot_electro MakerBot Generation 3 Electronics mostly assembled EUR 180 Yes
makerbot_usbttl MakerBot USB to TTL serial cable EUR 18 Yes
reprap_mb Reprap/Makerbot motherboard v1.2 fully assembled EUR 49 Yes
reprap_ec Reprap/Makerbot Extruder controler v2.2 fully assembled EUR 45 Yes
reprap_sd Reprap/Makerbot Stepper Driver v2.3 fully assembled EUR 39 Yes
nema_17 Reprap/Makerbot Stepper NEMA 17 Stepper Motor EUR 14 Yes
nema_23 Reprap/Makerbot Stepper NEMA 23 Stepper Motor EUR 27 NO
kysan_37 Makerbot Kysan DC Gearmotor - 37 mm EUR 19 Yes
smt_soldering Makerbot SMT Soldering kit - soldering paste + magnifying headgear EUR 45 Yes
cchb2 Makerbot Cupcake Heated Build Platform v2.0 EUR 48 Yes
sparekit Makerbot Spare parts kit EUR 60 Yes
MK5 drive gear Makerbot MK5 drive gear upgrade kit EUR 10 Yes
mk2frost Makerbot MK2 Frostruder kit EUR 150 Yes
mk1spindle Makerbot Deluxe Filament Spindle MK1 Kit EUR 110 Yes
606 bearing Makerbot 606 bearing for plastruder 6mm-17mm-6mm EUR 3 Yes
608 bearing Makerbot 608 bearing 8mm-22mm-7mm EUR 3 Yes
626 bearing 626 bearing 6mm-19mm-6mm for PrintruderII EUR 3 Yes
makerbot_40006 Nichrome Wire (31 GA) per meter (any length possible) EUR 1 Yes
pla-3r-860g roll of transparent PLA plastic 0.860 kg (2 lbs) 3mm diameter EUR 30 Yes
makerbot_abs_w_5 roll of white ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 45 NO
makerbot_abs_b_5 roll of black ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_abs_y_5 roll of yellow ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_abs_g_5 roll of green ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_abs_r_5 roll of red ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_abs_fr_5 roll of fluorescent red ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_abs_blue roll of blue ABS plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
makerbot_pla_c roll of clear PLA 4032D plastic 2.267 kg (5 lbs) 3mm diameter EUR 75 Yes
ulti_pla_clear roll of clear PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 Yes
ulti_pla_black roll of black PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 Yes
ulti_pla_green roll of green PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 Yes
ulti_pla_silver roll of silver PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 NO
ulti_pla_white roll of white PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 NO
ulti_pla_brown roll of brown PLA 4042D plastic 2.267 kg (5 lbs) 3mm diameter EUR 60 Yes
ulti_pla_blue roll of Translucent Blue PLA 4042D plastic 2.267 kg (5 lbs) (really freaky stuff!) 3mm diameter EUR 60 NO

All information here is only read by Wim Vandeputte

Please include your phone/fax number(s).
Please include the country and city codes with your phone number(s).
You need to give us a valid email address.
Fields named in Bold Type are required.
Please note that a valid phone number with country and area codes may be required to confirm credit card orders from many countries.

As we ship with UPS, make sure this is an address where UPS can deliver a package during business hours, perhaps take your work address. You'll receive a UPS tracking number via email when you package is sent out

Shipping info: (not the invoice address, the SHIPPING address)
Name:
Company:
Address Line 1:
Address Line 2:
Address Line 3:
City, State:
Postal/Zip code:
Country:
Note: IF you are a registered company, please only enter a valid VAT-COUNTRY, and VAT- ID, otherwise we cannot supply you with a valid invoice for tax use. Please chec k your VAT ID on the European site http://ec.europa.eu/taxation_customs/vies/vieshome.do Spanish users: don't confuse the Spanish NIF with the ES VAT number.
VAT-Country: VAT REG No: Please don't repeat your country code in the VAT code, it's a seperate field
Note: If you are a company and don't give us a valid valid VAT-COUNTRY, and VAT-ID
we cannot supply you with a valid invoice for tax use. That means paying an extra 21% you could have avoided. You've been warned.
Phone:
Fax:
Email:

How Will You be Paying?

If you would like to pay by bank transfer, or some method other than a credit card you can do so by first contacting orders@kd85.com, or kd85.com bvba at (FAX) +32 9 372 46 01. If you are doing this please select "Prearranged" for the Payment Method below. Invoices with prearranged will receive payment instructions via email, all accounts must be prepaid before your package will ship out. If you don't like this policy, please don't order from us.

We do not have a paypal account and never will.

We do accept Bitcoin.

Payment Method:
WARNING: The VISA Elektron card can not be used for mail order in Europe, so please do not use this card. Yes, this applies to Spanish, Greek, and U.K. users too. (Mail me for a solution)
We do not accept Paypal, don't ask, it's not an option
Card Number: (Please use spaces as on card)
Card Validation Digits:
This is the three extra numbers which appear after your credit card number on the back of your card
Please look Here for more information.
Expiry Date: Month: Year:
Note The default method of shipping is UPS.

We ship using UPS exclusively. Average cost is EUR 25 for 1 MakerBot for Standard service (3 days delivery). Express (next day delivery) is also possible but is a bit more expensive (EUR 40). If you want to order multiple units, UPS has a flexible weight based price increase, so estimate about EUR 30 to EUR 40 max, but ask me first. It depends on the country of destination and the weight. You can always check it on http://www.ups.be

Special order type:
Optional Reference: or Purchase Order Number to be printed on invoice
Additional comments (if applicable, like invoice address, suggestions)
By submitting this order, you agree to our invoice payment conditions. Know your rights as a European consumer!

Winter shipping schedule: No shipping from the 19th of December until the 2nd of January (CCC Congress 30C3).


If you have questions about your order shipping, availability, or any other doubt, call me at +32 478 21 73 55 or mail me at wim@kd85.com and you'll get a prompt answer.
(Dit kan best in het Nederlands, ici on parle Français, ich spreche auch Deutsch, and yes of course I speak English)

KD85.com company info can be found on http://kd85.com